二元彩票网 Accurately characterize the modulus, compliance, damping and other bulk properties of materials using our Dynamic Mechanical Analysis (DMA) solutions. Our state-of-the art instrumentation measures changes in rheological behavior under dynamic conditions as a function of temperature, time, frequency, stress, atmosphere, or a combination of these parameters. Applications and measurements include:

  • Stress-strain
  • Creep recovery
  • Thermomechanical
  • Moisture induced phase transitions
  • Moisture sensitive materials like paper, natural fibers, and food products
  • Swelling, shrinking and stiffness changes as humidity changes
  • Plasticizing and Tg effects as seen in nylon and polyurethanes

  • 产品与服务

  • 资源,活动及更多信息

  • Accessories (46)
  • Consumables (17)
  • Software and Informatics (1)
  • Instruments (1)
  • Aluminum (1)
  • Stainless Steel (1)
  • Over 100 (1)
  • DMA 8000 (11)
  • Diamond DMA (1)
  • Diamond TMA (1)
  • Pan Crimper (14)
  • Probes and Sample Tools (8)
  • Starter Kit (5)
  • Plates and Replacement Parts (3)
  • Humidity Sensor (3)
  • Material Pockets (3)
  • Forceps (2)
  • Mesh Pockets (2)
  • Clamp Assemblies and Replacement Parts (2)
  • PMMA (1)
  • Book (1)
  • DMA Assembly (1)
  • Measuring Systems (1)
  • Probe Assembly (1)
  • Flow Meter (1)
  • Gas Station (1)
  • Adapter Kits (1)
  • Capsule Kit (1)
  • Gas Purge (1)
  • Spares Kits (1)
  • Microswitch Extension (1)
  • Sample Tubes (1)
  • Replacement Parts (1)
  • Regulator (1)
  • Sample Load Fixture (1)
  • Bending Replacement Parts (1)
  • Air Dryer (1)
  • Cups (1)
  • Sample Pans (1)
  • UV Lamps (1)
  • Thermal Analysis (1)
  • EA (19)
  • DSC (12)
  • CHNO (2)
  • Thermal Analysis (1)

"动态热机械分析(DMA)" 1-5065 产品与服务

DMA 8000 N5330101


DMA 8000的创新型设计、高效灵活的操作使之成为材料研究开发和生产线质量控制的理想仪器??晒惴河τ糜诰酆衔?、复合材料、制药以及食品行业。

PMMA for Diamond DMA, 0.2mm x 8mm x 40mm

Set of 10 for Tension Measuring System, Dimensions: 0. 2mm x 8mm x40mm,

Standard Sample Pan Crimper Press

Used to crimp covers on standard DSC pans of aluminum, gold and copper. Design incorporates a replaceable crimper head.

High Pressure Capsule Sealing Tool

This reliable sealing tool is fast and precise. It employs a built-in torque clutch which guarantees that all capsules are closed with the same torque.

Volatile Sealer Assembly

For use with volatile, viscous,noncorrosive samples.


Special problems often require special tools and a wide range of options exist for the DMA 8000.

DMA 8000 Mesh Pockets (Set of 25)

For running pharmaceuticals, paints and other non supporting samples where letting moisture and solvent in and out is desirable.

Quartz Parallel Plate Probes for DMA 7/DMA 7e, 6 mm diameter flat tip

The following Quartz Probes are used on the Large and Small Quartz Parallel Plate Measuring Systems.

Quartz Parallel Plate Probes for DMA 7/DMA 7e and TMA 7, 3 mm diameter flat tip

PerkinElmer's quartz probes are manufactured to extremely high tolerances to ensure you obtain the most accurate data from your instrument.

Thermal Analysis Gas Station for all Thermal Analyzers (controls up to four purge gases). For use with Pyris Series or 7 Series/UNIX software.

Thermal Analysis Gas StationUse the Thermal Analysis Gas Station (TAGS), a gas selector accessory with all thermal analyzers. The TAGS is a very flexible accessory featuring full control of all gases used in thermal analysis. In addition to performing gas switching, the TAGS also fully controls the gas flow rate, independent of the type of gas, and detects rapid changes in pressure and empty cylinders.

Class 1.1 Calibrating Weight, 100 mg.

Class 1.1 Calibrating Weight (per ASTM E617,100 mg)

Fiber Clamp Assembly Top

Includes plate and screws.

Universal DMA7/DMA 7e Probe Tip Holder for use with Stainless Steel Single and Dual Cantilever

Universal DMA7/DMA 7e Probe Tip Holder for use with Stainless Steel Parallel Plate, 2-, 3-, and 4-Point Bending. Single and Dual Cantilever Measuring systems. Includes probe tip holder (P/N N5390104), collet (P/N N5391004), and lock nut (P/N N5391005).

Large Volume Stainless Steel Capsule Kit

This kit includes Quick Press (P/N 09908467), Quick Press Spacer Die (P/N 03191047), 1 Pair Guard Ring Inserts (P/N 03190236), and 20 Pans, Covers and O-Rings (P/N 03190218).

Standard Stirrup Kit

Includes two matched stirrups.

Manual Crimper

This sealer is capable of sealing both crimped pans and hermetic sealed pans . The die that is supplied can seal both of these, one side for crimped, the other for hermetic. Includes Hermetic Die N5356032 Stage N5356035 and Extruding Rod N5356033

Quartz Sample Tube for high-temperature furnace

Required for the expansion, penetration, compression and flexure modes of operation. Used with high temperature furnace, part of Quartz Parallel Plate System Kit (Product Number: N5390138)

Quartz Sample Tube for Standard Furnace

Used with standard furnace, part of Quartz Parallel Plate SystemKit P/N N5390135.

Quick Press

Included in the Large Volume Stainless Steel Capsule Kit (P/N 03190021).

"动态热机械分析(DMA)" 1-5065 产品与服务

915| 343| 773| 39| 621| 565| 175| 646| 170| 789|